Autocad Architecture 2017 What Should Annotative Plot Size Be Set To?

In the Calibration tab, you lot can practice the following things:

Display the available annotation scales
Create new note scales
Assign an note scale to a brandish configuration.

Note: You cannot gear up the annotation scale used for this drawing here.

The annotation scale determines how many drawing units in the drawing represent i inch (for imperial drawings) or ane millimeter (for metric drawings) in the plotted cartoon. A drawing calibration of 1/8"=ane'-0" (or i:96 - eight eighths per inch times 12 inches per foot) in a drawing that has inches as default drawing units means that 8 feet in the drawing are represented by 1 inch on the plotted out plan. As well, if a drawing has a calibration of 1:200 and a drawing unit of millimeters, then 200 millimeters in the drawing will be represented past one millimeter on the plotted out plan.

Annotation plot size, multiplied by the scale factor, determines the superlative of plotted annotation text. Scale-dependent objects in a cartoon are scaled automatically upon insertion to reflect the units that are specified in a cartoon. Any content that you create can be congenital to accept reward of these settings and is thus scaled accordingly.

Click Utilities Cartoon Setup .
Click the Scale tab.

Specifying default scale options for the current cartoon
Under Calibration, the available annotation scales are displayed.
Note: The scale values in the listing reflect the current drawing units.
To assign an annotation calibration to a specific display configuration, commencement select the desired annotation scale from the Calibration listing, and then select the brandish configuration to associate information technology with from the Brandish Configurations list.
Nether Calibration value, the currently used annotation scale for this display configuration is displayed.
To edit an existing scale or add a new scale, click Edit Calibration List.
- To edit an existing calibration, select it, and click Edit.
- To add a new calibration, click Add, and enter a display name and calibration values.
- To rearrange the order of the scale entries, apply the Move upwards and Move down buttons.
Click OK.
Select Automatically Create Dimscale Override, if you want to make the dimension scale match your drawing scale.
The override applies a scale factor to the dimension style properties.

Annotation: AEC dimensions added with tools are not afflicted by the dimension calibration override because an AEC dimension style depends on which display representation is active.

If y'all articulate Automatically Create Dimscale Override, the software is prevented from automatically applying an override to the electric current dimension scale mode in the drawing.
Enter a value for Annotation Plot Size.
The note plot size is ever measured in millimeters for metric drawings and in inches for imperial drawings. Note plot size, multiplied by the drawing scale factor, determines the acme of plotted annotation text.

Relieve the scale settings:

If yous want to…	So…
save the scale settings equally default settings for new drawings that yous start from scratch or from templates that do not comprise drawing setup information	select Save as Default. Settings on the Units and Layering tabs are besides saved equally default settings.
save the scale settings only for the current drawing	clear Save equally Default, and and then click Apply.

Note: You can save one default drawing scale set per unit type with the Relieve equally Default option. Ascertain a prepare of imperial drawing scale defaults, and click Save as Default. Next, ascertain a prepare of metric scale defaults, and click Save every bit Default again. When you start a drawing without a template with imperial units, the imperial default scale will be used. When yous kickoff a drawing without a template with metric units, the metric default calibration will be used. If yous start a new cartoon with a template, the settings saved within that template file volition be used regardless of the saved default settings.

Click OK.
If yous too changed the drawing units, yous are prompted to specify whether existing objects in the current cartoon should be scaled for the new units.

Autocad Architecture 2017 What Should Annotative Plot Size Be Set To?,

Source: https://knowledge.autodesk.com/support/autocad-architecture/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/AutoCAD-Architecture/files/GUID-3B8239C0-644E-4757-A4E0-D09816C46AC4-htm.html

Posted by: vargoinscurs.blogspot.com